DIN 267-9
Mechanical Fasteners – Technical Conditions of Delivery – Components with Electroplated Coatings
English
1979
2.002
Detailed Information
These technical conditions of delivery apply to mechanical fasteners (mainly bolts and nuts) with electroplated coatings.
Download File
(Log in to download spec.)
Check out other specifications
2006
English
SMALL SOLID RIVETS 7/16 IN. NOMINAL DIAMETER AND SMALLER
This standard covers complete general and dimensional data for those types of small solid rivets recognized as “American National Standard." All other types of small solid rivets, within the limits of the diameters contained herein, are to be considered special. Also included is an appendix cover...
1995
English
Hexagon washer head tapping screws
This Standard specifies hexagon washer head tapping screws with threads from ST2.2 up to and including ST8.
1993
English
Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room temperature, the ...
2010
English
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI...
2008
English
SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)
1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys recognized as an American National Standard. Also, included are appendices that provide specifications for ...