DIN 434

Square taper steel washers for use with channel sections

English 2000
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-138
2002
English

STRAIGHTNESS GAGING METHOD AND STRAIGHTNESS LIMITS FOR MACHINE, TAPPING, AND THREAD ROLLING SCREWS

This standard establishes a method for inspecting the out-of-straightness limits for machine, tapping, and thread rolling screws. Included are screws fully threaded or with thread lengths of at least 4D and screw lengths to and including 12 inches (D equals nominal screw diameter). For screws wit...
ASTM
ASTM F1470
2009
English

STANDARD PRACTICE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION

Throughout this practice the terms detection and prevention apply to quality control systems. A brief description of both is provided to assist the purchaser in the application of this practice. The detection system relies on inspection as the primary means of controlling the quality of furnishe...
JIS
JIS B 0209-4
2001
English

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot -dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to JIS B 0205-3 having a basic profile according to JIS B 0205-1. External screw threads according to this Standard are intended to mate with inte...
DIN
DIN 1441
1974
English

Washers – Type Coarse – for Bolts

Material: St - steel; grade at manufacturer's choice
ASTM
ASTM F835M
1998
English

Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws M3 through M20 thread sizes having material properties of ISO 898/1 Property Class 12.9. 1.2 Fasteners meeting this specification are int...
JIS
JIS B 1022
1999
English

Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C

This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Deviations from the tolerances specified in t...