Check out other specifications
2000
English
STEEL TRANSMISSION TOWER BOLTS, ZINC COATED AND BARE
1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc coated steel bolts and atmospheric corrosion resistant bolts , in nominal thread diameters of 1/2, 5/8, 3/4, 7/8 and 1 in. for use in the construction of transmission towers, substations, and si...
2018
English
Fasteners — Electroplated coating systems
This document specifies requirements for electroplated coatings and coating systems on steel fasteners. The requirements related to dimensional properties also apply to fasteners made of copper or copper alloys. It also specifies requirements and gives recommendations to minimize the risk of hyd...
1993
English
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints Using AS...
1995
English
QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURERS, DISTRIBUTORS, AND TESTING LABORATORIES
1-1.1 Part 1 contains the definitions used in this standard. Parts 2, 3, and 4 contain the requirements necessary to receive accreditation from The American Society of Mechanical Engineers (ASME) which must be met by manufacturers and alteration distributors of fasteners, non-alteration distribut...
1988
English
Toothed lock washers
The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers piercing the coating when such components are joined. For such applications, the effectiveness of tooth...
