Check out other specifications
2009
English
WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)
This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), and plain washers (# 0 through 3 in.).
1997
English
FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM
This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, UNRC or UNRF threads and where the temperatures will not exceed 250°F.
2003
English
Fasteners—Acceptance inspection
This Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected in cases where no other such procedure was agreed with the supplier at the time the fasteners were ordered. Additio...
2001
English
Hexagon slotted and castle nuts
This Japanese Industrial Standard specifies hexagon slotted and castle nuts of steel (hereafter referred to as “steel nut”), and hexagon slotted and castle nuts of stainless steel, (hereafter referred to as “stainless steel nut”), both for general use.
1998
German
Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997
Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.