DIN 76-1
Thread run-outs and thread undercuts for ISO metric threads as in DIN 13-1
English
2004
0.000
Detailed Information
This standard specifies dimensions for thread run-outs and thread undercuts for bolts, screws and similar components with external or internal ISO metric (coarse or fine pitch) thread as in DIN 13-1 and DIN ISO 261.
Download File
(Log in to download spec.)
Check out other specifications
2002
English
NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B
MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UNS S31700) AND 347 (UNS S34700), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. BRASS, ALLOY 462 (UNS C462...
2011
English
Button head screws — Part 1: Hexagon socket button head screws
This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this International ...
1990
English
Product grade A washers with a hardness up to 250 HV designed for use with hexagon head bolts and nuts
This standard specifies requirements for product grade A washers with a hardness up to 250 HV, designed for use with bolts of properly class 8.8 or less. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths acoss flats as sp...
1998
English
Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation
This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see JIS B 0002...
2000
English
Plain washers – Small series – Product grade A
This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 36 mm inclusive.
1992
English
Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744
This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to each sid...