DIN 7981

Cross recessed pan head tapping screws

English 1984
0.000
DIN
Detailed Information

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies).
DIN 4000-2-1 tabular layout of article characteristics shall apply for screws in accordance with this standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 927
1986
English

Slotted shoulder screws

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April 1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and...
JIS
JIS B 1182
1995
English

Square head bolts

This Japanese Industrial Standard specifies the steel square head bolts for general use (hereafter, referred to as "bolts"). Further, the strength class column II (4T) of mechanical properties specified in this Standard will be abolished on April 1, 1999.
DIN
DIN 2999-2
1973
English

Whitworth Pipe Threads for Tubes and Fittings – Cylindrical Internal Thread and Conical External Thread – Gauging System and Use of Gauges

The gauging system takes account of the function of the screwed joints and of practical installation requirements. The cylindrical internal thread is therefore gauged with a conical screw limit plug gauge with a 1:16 taper. In this case the screw limit plug gauge represents the conical external t...
ISO
ISO 7721
1983
English

Countersunk head screws – Head configuration and gauging

This International Standard specifies the Characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the respective product standards.
ISO
ISO 898-2
2012
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread

This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Nuts conforming to the requirements of this part of ISO 898 are evaluated at that ...
DIN
DIN 267-21
1981
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Aufweitversuch für Muttern

1 Geltungsbereich Diese Norm ergänzt DIN 267 Teil 1 und Teil 4, sowie DIN lSO 898 Teil 2 und enthält Festlegungen über einen Aufweitversuch für Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 und DIN 267 Teil 4 mit Gewindedurchmessern von 3 bis 39 mm. 2 Zweck Der Aufweitversuch nach diese...