Check out other specifications
1992
English
Unhardened parallel pins with internal thread (ISO 8733 : 1986) English version of DIN EN 28 733
This International Standard specifies the characteristics of unhardened parallel pins with internal thread, with metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
1993
English
Standard Specification for Steel Structural Rivets
1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 1 1/2 in. ( 13 to 38 mm), inclusive, for structural fabricating purposes. The grades are as follows: 1.1.1 Grade 1 is a carbon steel rivet for general purposes. 1.1.2 Grade 2 is a carbon-manganese steel rivet suit...
1994
English
MACHINE DOWEL PINS – HARDENED GROUND [METRIC SERIES]
1.1 Scope 1.1.1 This standard covers the dimensional and general data for hardened ground dowel pins in sizes 1.5 - 25 mm in two series recognized as American National Standard, which are widely used in general industrial applications. 1.1.2 The inclusion of dimensional data in this standard is...
1992
English
Hexagon nuts, style 1 – Product grades A and B (ISO 4032 :1986) English version of DIN EN 24032
This International Standard gives specifications for hexagon nuts, style 1, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade B for sizes d > M16.
1983
English
ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes
This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum dimension and by R min = 0,125P ≈ H/7 for the minimum dimension of the minor diameter d3, as specified in...
1986
English
Slotted pan head screws with shoulder
The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April1968 edition, has been replaced byproduct grade F as specified in DIN 267 Part 6 and p...