DIN 94
Split pins
English
1983
0.000
Detailed Information
In its October 1972 edition, DIN 94 was aligned with International Recommendation ISO/R 1234 – 1971. This Recommendation was converted into an International Standard in 1976, without any technical changes being made to the previous specifications.
Download File
(Log in to download spec.)
Check out other specifications
2008
English
SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)
1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys recognized as an American National Standard. Also, included are appendices that provide specifications for ...
1992
English
Hexagon head pipe plugs
This standard specifies dimensions and technical delivery conditions for pipe plugs which are intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 12, DIN 158, DIN 3858 or ISO 228 Part 1. Since tightness is a function of pressure, temperature, the materials involved ...
2012
English
Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed spring steel wire
1.1 This European Standard applies to patented cold drawn unalloyed steel wire of circular cross-section for the manufacture of mechanical springs for static duty and dynamic duty applications. 1.2 In addition to this European Standard, the general technical delivery requirements of EN 10021 are...
2005
English
Hexagon flange bolts
This Japanese Industrial Standard has been prepared based on ISO 15071 Hexagon bolts with flange—Small series—Product grade A and ISO 15072 Hexagon bolts with flange with metric fine pitch thread—Small series—Product grade A published in 1999 as the first edition by editing and integrating the co...
1997
English
Standard Specification for Alloy Steel Socket Set Screws [Metric]
1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.
1990
English
Countersunk flat head screws – Part 2: Penetration depth of cross recesses
This part of ISO 7721 specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).