DIN EN 28748

Coiled, heavy duty spring-type straight pins (ISO 8748 : 1987) English version of DIN EN 28 748

English 1992

0.000

Detailed Information

This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 20 mm inclusive.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 6796

1987

English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assemblies worki...

BS EN

BS EN 10025-2

2004

English

Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 t...

DIN

DIN 979

2000

English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).

DIN EN

DIN EN 10263-2

2002

English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on final components.

DIN

DIN 267-12

1971

English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons for adopting different arrangements in individual cases.

DIN

DIN 608

1981

English

Flat countersunk square neck bolts with short square

This standard specifies flat countersunk square neck bolt with short square, with metric threads M 10 and M 12, of product grade C.