DIN EN 28752
Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752
English
1993
0.000
Detailed Information
This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
Reduced shank bolts and screws with coarse thread
This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Although such bolts have a reduced shank, they are not waisted shank bolts. In addition to ...
1986
English
Hexagon socket countersunk head cap screws
This standard specifies product grade A hexagon socket countersunk head cap screws with ISO metric screw thread from size M 3 up to and including size M 24. If, in special cases, the screws are to meet requirements other than those given in this standard, e.g. with regard to property class or ma...
1999
English
CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS
This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
2008
English
“TWIST OFF” TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES, STEEL, HEAT TREATED, 150 KSI MINUMUM TENSILE STRENGTH
1.1 This specification covers two types of heat treated, steel, tension control bolt-nut-washer assemblies, also referred to as "sets," having a tensile strength of 150 to 173 ksi. These assemblies are capable of developing a minimum predetermined tension when installed by applying torque to the ...
1993
English
METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS
1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as American National Standard. Also included are appendices covering formulas for dimensions, part numbering ...