DIN EN ISO 2010

Countersunk slotted raised head screws (common head style) Product grade A

English 1994

0.000

Detailed Information

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.

If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Download File

(Log in to download spec.)

Check out other specifications

JIS

JIS B 1127

1995

English

Hexagon flange head tapping screws

This Standard specifies hexagon flange head tapping screws with threads from ST2.2 up to and including ST9.5.

DIN

DIN 1163

1973

English

Moulding nails

Moulding nails shall be made of steel (grade at manufacturer's discretion) and have a bright finish (bk).

MIL

MIL-DTL-1222J

2000

English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/4 inch to 1-1/2 inches for submarine safet...

DIN

DIN 267-15

1983

English

Fasteners – Technical delivery conditions – Prevailing torque type nuts

The property classes, mechanical and performance properties and the methods of test listed in this standard apply to prevailing torque type nuts - with nominal thread diameters from 3 to 39 mm; - with ISO metric thread as specified In the DIN 13 standard series; - with styles as specified in the ...

ASME ANSI

ASME/ANSI B18.3.1M

1993

English

METRIC SOCKET HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional data for metric series hexagon socket head cap screws in sizes from 1.6 mm to 48 mm and for metric series spline socket head cap screws in sizes from 1.6 mm to 8 mm recognized as American National Standard. Also included are appendices...

DIN

DIN 979

2000

English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).