IFI-551
METRIC STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS
English
1999
0.000
Detailed Information
This standard establishes the dimensional, mechanical and performance requirements of metric structural flush break pull
mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly.
Download File
(Log in to download spec.)
Check out other specifications
1983
English
Plain washers for metric bolts, screws and nuts – General plan
This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. This International Standard does not apply to washers for preassembled bolts and screws as far as the ho...
2000
English
QUENCHED AND TEMPERED STEEL BOLTS AND STUDS
This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.
2004
English
Hexalobular socket head cap screws
This Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing...
2022
English
Specification for Zinc Flake Coatings for Bolted Joints
1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosion resistance are available, 240 hour and 960 hour. Note 1 JDM F25 uses black color appearance as a visual i...
1999
English
CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous and nonferrous fasteners. 1.2 There are eight grades available under this standard; four for zinc and four for...