ISO 15071
Hexagon bolts with flange — Small series — Product grade A
English
1999
0.000
Detailed Information
This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8, 9.8, 10.9 and A2-70.
Download File
(Log in to download spec.)
Check out other specifications
1985
English
Diameter of clearance holes and counter bores for bolts and screws
This Japanese Industrial Standard specifies the diameters of clearance holes, hereinafter referred to as the "bolt hole diameters", and the diameters of counterbores for bolts, machine screws, and the like for general use.
1998
English
ROUND HEAD BOLTS (INCH SERIES)
This standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Standard. Also included is an appendix covering gages and gaging for checking bolt straightness.
1995
English
Hexagon set screws with small hexagon, half dog point and flat cone point
This standard specifies dimensions and technical delivery conditions for coarse and fine pitch thread M6 to M36 hexagon set screws with small hexagon, half dog point and flat cone point, assigned to product grade A. These screws are only to be used as forcing screws (i e. for adjusting and locati...
1992
English
Grooved pins with countersunk head (ISO 8747 : 1986) English version of DIN EN 28 747
This International Standard specifies the characteristics of countersunk head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,4 to 20 mm inclusive. The displaced material to each side...
1977
English
ISO metric trapezoidal screw threads – Tolerances
This International Standard specifies a tolerance system for metric trapezoidal screw threads according to ISO 2902. The tolerances refer to the basic profile according to ISO 2901. The tolerance system does not apply to trapezoidal screw threads with special requirements on axial displacement, ...