JIS B 1175
Hexagon socket head shoulder screws
English
1988
0.000
Detailed Information
This Japanese Industrial Standard specifies the steel hexagon socket head shoulder screws used generally, hereinafter referred to as the “screws”. However, the screws to be used for holding stripper of press dies may be in accordance with JIS B 5064, as required.
Download File
(Log in to download spec.)
Check out other specifications
1997
English
Threaded fasteners— Axial load fatigue testing— Test methods and evaluation of results
This Japanese Industrial Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room temperature...
2009
English
Continuously hot-dip coated steel flat products – Technical delivery conditions – English version of DIN EN 10346:2009-07
This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction, of steels with high proof strength for cold forming and coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-z...
2007
English
TEST PROCEDURE FOR THE PERFORMANCE OF ADHESIVE COATED PREVAILING-TORQUE SCREWS
This standard establishes a conformance test procedure for the performance of adhesive coated prevailing-torque screws, in nominal screw sizes No. 4 thru 3/4 in. Torque values given in this standard are conformance requirements for adhesive coated prevailing-torque screws and apply only to the c...
1999
English
Parallel pipe threads
This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel internal pipe thread of Class B of PF 1/8 to PF 6 in thread designation and the parallel thread of PF 7 to PF...
1984
English
Fasteners – Technical delivery conditions – Design and dimensional accuracy
This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of bolts, screws and nuts.
2002
English
WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES
a. CARBON STEEL WASHERS SHALL HAVE A HARDNESS OF 38 TO 46HRC. b. CORROSION-RESISTANT STEEL WASHERS TYPE 420 (UNS S42000) SHALL HAVE A HARDNESS OF 45-53 HRC, AND TYPE 300 (UNS S3XXXX) SERIES WASHERS SHALL HAVE A HARDNESS OF 35-43-HRC. c. PHOSPHOR BRONZE AND TIN-BRASS WASHERS SHALL HAVE A MINIMUM H...