Check out other specifications
1970
English
ISO MINIATURE SCREW THREADS
This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter. For technological and functional reasons the tolerancing system for these threads differs from the tolerancing system for ISO general purpose metric screw threads.
2011
English
Fasteners – Ends of parts with external ISO metric thread
This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standardized or non-standardized threaded parts. For each end type, a symbol is specified and it is intended th...
1999
English
PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)
CARBON OR ALLOY STEEL PINS SHALL HAVE A CORE HARDNESS OF 47-58 HRC, AND A CASE HARDNESS OF 60 HRC MINIMUM. THE CORE HARDNESS OF THE PINS SHALL NOT IN ANY INSTANCE EXCEED THE CASE HARDNESS. MINIMUM PENETRATION FOR THE CASE HARDNESS SHALL NOT BE LESS THAN .020 INCH. PINS 1/16 INCH AND LESS IN DIAME...
1973
English
ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in
This International Standard tabulates ISO inch screw threads {except for pipe threads) having the basic profile for triangular screw threads specified in ISO 68, ISO general purpose screw threads - Basic profile. It comprises both a general plan of the ISO inch screw threads and the ISO inch scr...
1994
English
Foundation bolts
This Japanese Industrial Standard specifies the steel foundation bolts for general use (hereafter, referred to as "bolts").