JIS B 1195

Weld bolts

English 1994
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies steel weld bolts, hereafter referred to as “bolts”, for general purpose.

This bolt is intended to be projection-welded at its bearing surface side of head for service, but the bolt to be welded at the top surface of head for service is excluded.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assemblies worki...
BS EN
BS EN 10025-2
2004
English

Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 t...
DIN
DIN 979
2000
English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).
DIN EN
DIN EN 10263-2
2002
English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on final components.
DIN
DIN 267-12
1971
English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons for adopting different arrangements in individual cases.
DIN
DIN 608
1981
English

Flat countersunk square neck bolts with short square

This standard specifies flat countersunk square neck bolt with short square, with metric threads M 10 and M 12, of product grade C.