QQ-Z-325C

ZINC COATING, ELECTRODEPOSITED, REQUIREMENTS FOR

English 1976
0.000
Fed. Spec.
Detailed Information

1.1 Scope. This specification covers the requirements for electrodeposited zinc coatings. The terms ” coating” and “plating” are used interchangeably throughout the specification.
1.1.1 Federal specifications do not include all types, classes, grades, and sizes of the commodities indicated by the titles of the specifications, or which are commercially available, but are intended to cover the types, etc., for which are suitable for Federal Government requirements.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1127
1995
English

Hexagon flange head tapping screws

This Standard specifies hexagon flange head tapping screws with threads from ST2.2 up to and including ST9.5.
DIN
DIN 1163
1973
English

Moulding nails

Moulding nails shall be made of steel (grade at manufacturer's discretion) and have a bright finish (bk).
MIL
MIL-DTL-1222J
2000
English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/4 inch to 1-1/2 inches for submarine safet...
DIN
DIN 267-15
1983
English

Fasteners – Technical delivery conditions – Prevailing torque type nuts

The property classes, mechanical and performance properties and the methods of test listed in this standard apply to prevailing torque type nuts - with nominal thread diameters from 3 to 39 mm; - with ISO metric thread as specified In the DIN 13 standard series; - with styles as specified in the ...
ASME ANSI
ASME/ANSI B18.3.1M
1993
English

METRIC SOCKET HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional data for metric series hexagon socket head cap screws in sizes from 1.6 mm to 48 mm and for metric series spline socket head cap screws in sizes from 1.6 mm to 8 mm recognized as American National Standard. Also included are appendices...
DIN
DIN 979
2000
English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).