DIN 267-2

Fasteners – Technical delivery conditions – Design and dimensional accuracy

English 1984
0.000
DIN
Detailed Information

This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of bolts, screws and nuts.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 931-2
1987
English

M42 to M160 x 6 hexagon head bolts – Product grade B

This standard, supplementing DIN 931 Part 1, specifies requirements for M42 to M160 x 6 hexagon head bolts assigned to product grade B. If, in special cases, the bolts are to comply with specifications other than those given in this standard, e.g. regarding nominal lengths, these shall b […]
DIN
DIN 444
1983
English

Eyebolts

This edition of DIN 444 contains corrections which had become necessary due to an incorrect correlation between limiting sizes and types in the October 1981 edition of the standard.
JIS
JIS B 0176-4
2002
English

Threading tools—Vocabulary Part 4 : Thread rolling dies

This part of JIS B 0176 specifies terms and definitions related to thread rolling dies to be used mainly for metal workings in general.
DIN EN
DIN EN 24017
1992
English

Hexagon head screws – Product grades A and B (ISO 4017:1988) English version of DIN EN 24 017

This International Standard gives specifications for hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is shorter, and product grade B for threads over M24 or nomi […]
Custom
General Motors | GM6047M
2005
English

Corrosion Protective Coatings Phosphate/Electro-Organic

This specification covers the basic requirements for a black corrosion protective coating which is produced by the use of the bulk electrodeposition process or, if the parts do not lend themselves to barrel processing, the parts may be racked prior to the electrodeposition process. The pr […]
JIS
JIS B 1059
2001
English

Drilling screws with tapping screw thread — Mechanical and functional properties

This Standard specifies the properties of heat treated screws with a tapping screw thread in accordance with JIS B 1007, and which are designed with a drilling point which automatically drills the core hole for the screw during assembly. Such screws then automatically form the mating scre […]