DIN 1445

Clevis pins with head and stud end

English 1977

0.000

Detailed Information

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 127

1987

English

Spring lock washers with square ends or tang ends

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 [...]

ISO

ISO 1483

1983

English

Slotted raised countersunk (oval) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

ASTM

Abstract of ASTM F912

2000

English

ALLOY STEEL SOCKET SET SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) 0.060 thru 2.000 in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws are [...]

BS EN

BS EN 12163

2011

English

Copper and copper alloys — Rod for general purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced [...]

ANSI

ANSI B18.2.3.5M

1995

English

METRIC HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not i [...]

JIS

JIS B 0206

1973

English

Unified coarse screw threads

This Japanese Industrial Standard specifies the basic profile, and the formal and basic size of unified coarse screw threads used for aircrafts and otherwise only when especially required. Ref [...]

ISO

ISO 724

1993

English

ISO general-purpose metric screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.

DIN

DIN 7968

1989

English

Hexagon fit bolts for structural steel bolting for supply with or without nut

This standard specifies requirements for M 12 to M 30 hexagon fit bolts assigned to product grade C for use in structural steel bolting.

DIN

DIN 6303

1986

English

Knurled nuts

The following amendments have been made in comparison with the January 1971 edition a) The content of the standard has been editorially revised and aligned with the basic standards concerned b) [...]