JIS B 1014
Countersunk flat head screws— Part 2 : Penetration depth of cross recesses
English
1994
0.000
Detailed Information
This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
Download File
(Log in to download spec.)
Check out other specifications
1999
English
Steel hexagon head bolts for structural steel bolting, for supply with hexagon nuts
This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon head bolts of product grade C for use in structural steel bolting. It also specifies the nuts and washers to be used.
2007
English
TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS- METRIC SERIES
This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to metric series nuts, in nominal sizes M5 thru M20 intended for application temperatures of -40°C to 180°C. Torque values for performance level I and level II given in this standa...
1996
English
Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 through M100 suited for use in general engineering applications. 1.2 This specification does not cover dimen...
1991
English
Fasteners – Surface discontinuities – Nuts – English version of DIN EN 493: 1992
1.1 This European Standard establishes limits for various types of surface discontinuities on nuts with - nominal thread diameters from 5 up to and including 39 mm - product grades A and B - all property classes according to EN 20898-2, ISO 898-6 and ISO 2320 unless otherwise specified In product...
2002
English
STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS
1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in. nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.
1995
English
Cross recessed head screws with captive washer
This Japanese Industrial Standard specifies steel or brass made cross recessed head screws with captive washer for general purposes. The cross recessed head screw with captive washer is a screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent t...