DIN 977

Hexagon weld nuts with flange

English 1998
0.000
DIN
Detailed Information

This standard specifies requirements for hexagon weld nuts with flange, with size M5 to M16 metric threads (coarse) or 12 mm to 16 mm diameter threads (fine), of product grade A.
Weld nuts conforming to this standard are suitable for use with bolts of property classes up to 10.9 (cf. DIN EN 20898-1).

Download File
(Log in to download spec.)

Check out other specifications

ANSI
ANSI B18.16.1M
1995
English

MECHANICAL AND PERFORMANCE REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS

1.1 This standard covers the mechanical and performance requirements for prevailing torque type steel metric hex and hex flange nuts, - With hex nut nominal thread diameters M3 thru M36; - With [...]
DIN EN
DIN EN 26157-1
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)

1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - nomi [...]
ASTM
ASTM A653/A653M
2000
English

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. 1.2 The product is produced in vari [...]
DIN EN 28675
1992
English

Hexagon thin nuts with metric fine pitch thread – Product grades A and B (ISO 8675 :1988) English version of DIN EN 28675

This International Standard gives specifications for hexagon thin nuts, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grade A [...]
ASTM
Abstract of ASTM A325
2002
English

STRUCTURAL BOLTS, STEEL, HEAT TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less, and 105 ksi for sizes [...]
DIN
DIN 582
1971
English

Lifting Eye Nuts

Lifting eye nuts must always be tightened so that they bear solidly on the surface they contact. Loads at right angles to the plane of the eye are prohibited. When a specific position in relati [...]
DIN
DIN 267-19
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Oberflächenfehler an Schrauben

Diese Norm ergänzt DIN 267 Teil 1 und Teil 2 sowie DIN ISO 898 Teil 1 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfeh [...]
ASME
ASME B18.6.3
2010
English

MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recogni [...]
DIN EN
DIN EN 24036
1992
English

Hexagon thin nuts – Product grade B (unchamfered) (ISO 4036 :1979) English version of DIN EN 24 036

This International Standard gives specifications for hexagon thin nuts with metric dimensions and thread diameters from 1,6 up to and including 10 mm and product grade B. If, in special cases, [...]