DIN EN 28735

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ANSI
ANSI B18.2.3.2M
1995
English

METRIC FORMED HEX SCREWS

1.1 This standard covers the complete general and dimensional data for metric formed hex screws recognized as American National Standard. Formed hex screws are cold formed products with fully u [...]
DIN
DIN 936
1976
English

Hexagon Thin Nuts (Old Type)

Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only. For new designs, hexagon nuts according to D [...]
DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
ANSI ASME
Abstract of ANSI/ASME B1.16M
1992
English

GAGES AND GAGING FOR METRIC M SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on M series metric screw threads, and covers the specifications and dimensions for the thread gages and measuri [...]
DIN
DIN 7981
1984
English

Cross recessed pan head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000-2-1 tabular layout of article characteristics shall apply for scre [...]
ASTM
Abstract of ASTM F871M
1991
English

ELECTRODE POSITED COATINGS ON METRIC THREADED COMPONENTS

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fast [...]
NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UN [...]
DIN
DIN 78
2001
English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13 [...]
JIS
JIS B 1128
2004
English

Hexalobular socket head tapping screws

This Standard specifies the characteristics of hexalobular socket head tapping screws with nominal thread size from ST2.9 to ST6.3. If specifications other than those listed in this Standard ar [...]
5.01