Check out other specifications
2012
English
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Nuts conforming to the requirements of this part of ISO 898 are evaluated at that ...
2000
English
Plain washers – Normal series – Product grade C
This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers of hardness class 100 HV are suitable for -hexagon bolts and sc...
2001
English
NONFERROUS NUTS FOR GENERAL USE
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specifica...
1996
English
SCREW AND WASHER ASSEMBLIES – SEMS
(a) This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. The word SEMS is recognized in the United States as a generic term applicable to screw and washer assemblies. Also included in this standard are a...
1995
English
QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURERS, DISTRIBUTORS, AND TESTING LABORATORIES
1-1.1 Part 1 contains the definitions used in this standard. Parts 2, 3, and 4 contain the requirements necessary to receive accreditation from The American Society of Mechanical Engineers (ASME) which must be met by manufacturers and alteration distributors of fasteners, non-alteration distribut...