ISO 261
ISO general purpose metric screw threads – General plan
English
1973
0.000
Detailed Information
This International Standard specifies ISO general purpose metric screw threads having the basic profile according to ISO 68, ISO general purpose screw threads – Basic profile.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
METRIC HEX JAM NUTS
1.1 This standard covers the complete general and dimensional data for metric hex jam nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described […]
1985
English
Gauges for taper pipe threads
This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the "thread gauge", to be used for the dimensional inspection of the taper external thread for pipe (R), taper internal thread for pipe (Rc) and parallel internal thread for pipe (Rp), w […]
2009
English, French, Russian
Fasteners – Terminology
This International Standard provides translation guidance for terms commonly used to describe fasteners. This International Standard lays down the terminology of fasteners in English, French and Russian, recommended for use unless otherwise specified in the appropriate product standard. […]
1991
English
Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2
1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wide flats, — hot or cold rolled sheet/plate and strip, — hammer and drop forgings (see note 2), ma […]
1998
English
SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING
SELF-LOCKING ELEMENT: (a) THE SELF-LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-F-18240. (b) FOR DESIGN AND USAGE LIMITATIONS, SEE MS15981. (c) LOCATION OF EFFECTIVE LOCKING AREA SHALL BE IN ACCORDANCE WITH MS15981. (d) MAXIMUM RING GAGE DIAMETER THAT LOCKING REGION OF SETSCREW MUST PA […]