ISO 1483
Slotted raised countersunk (oval) head tapping screws (common head style)
English
1983
0.000
Detailed Information
This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1982
English
Disc wheels for motor vehicles and trailers – Fasteners for stud centring
This standard specifies requirements for fasteners for stud-centred disc wheels on motor vehicles and trailers. Any necessary draft on the hexagon shall be within the tolerance on the width across flats.
1984
English
Plain washers, chamfered, hardened and tempered for high-strength structural bolting
This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from M12 to M36 inclusive.
2004
English
Metallic products – Types of inspection documents
1.1 This document specified the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, forgings, castings, whatever their method of production. 1.2 This document may ...
1998
English
SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A
The minimum tensile strength in load pounds, indicated for each size in Table I, is based on 80.000 PSI minimum tensile strength. Load pounds are calculated by the stress areas indicated in FED-STD-H28/2. The yield strength, based on 0.2 percent offset, shall be 30.000 PSI minimum. The minimum ha...
1990
English
Spring lock washers for screw and washer assemblies
Spring lock washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 3. They are designed for use with bolted connections with bolts of a property class below 8.8 (as specified in ISO 898 Part 1). Spring lock washers are intended to...
2002
English
STUDS AND BENT BOLTS
This standard covers the general and dimensional requirements for various types of studs and bent bolts in nominal thread diameters 1-1/2 inches and smaller. Section A details double end studs (Table 1); Section B details interference-thread double end studs (Table 2); Section C details continuo...