DIN 913
Hexagon socket set screws with flat point – ISO 4026 modified
English
1980
0.000
Detailed Information
ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
Download File
(Log in to download spec.)
Check out other specifications
2004
English
ALLOY STEEL SOCKET SET SCREWS
1.1 This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000-in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws are intended for compression applications only and are not customarily subjected to embrittlement tests....
2001
English
NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications. 1.2 Applicable nuts for use with bolts, cap ...
1973
English
Driving Elements – Bushes for Plain Bearings – according to DIN 502, DIN 503 and DIN 504
A long-standing desire of users to see the interchangeability of bearing bushes assured when they have to be replaced has now been fulfilled by the standardization of these bushes. The outside diameters of the bushes could not however be scheduled in agreement with DIN 1850 Part 1 (August 1970 is...
1989
English
High-strength hexagon head bolts with large widths across flats for structural steel bolting
High-strength hexagon head bolts are intended for use in GV and SL structural steel bolting in accordance with DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers.
1986
English
Slotted countersunk (flat) head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g hes been replaced by product grade C. c) The content of the standar...
1998
English
ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL
1.1 This specification covers requirements for electrodeposited zinc coatings applied to iron or steel articles to protect them from corrosion. It does not cover electrodeposited zinc coated steel wire or sheets (see ASTM A591/A591 M for sheets). 1.2 The coatings are provided in four standard thi...