ISO 4757
Cross recesses for screws
English
1983
0.000
Detailed Information
This International Standard defines two types of cross recesses for screws:
– recess type H;
– recess type Z.
Included in this International Standard is a method of penetration gauging for both types.

Download File
(Log in to download spec.)
Check out other specifications
2012
English
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. 1.2 This specification covers mechanical tubing made from hot- or cold-rolled steel. 1.3 This specification covers round, square, rectangular, and special shape tubing.
1973
English
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the diameter range 1 to 39 mm. These selected sizes are recommended also for general engineering use. These screw threads are selected from ISO 261, ISO general purpose metric screw thre...
1987
English
INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. The basic structure of this plan outlines the quality a...
2008
English
SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS
This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolt, screws, and studs, including heat-treated machine screws, tapping screws, and sems (the washers of screw-washer assemblies are excluded). ...
1970
English
Countersunk (Flat) Head Tapping Screws with Slot
Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical conditions of delivery and materiel according to DIN 267 Sheet 12.
1972
English
Slotted Set Screws with Chamfered Ends
Compared with the April 1956 issue, the following amendments and additions should be noted: a) In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M 1.9 and M 2.5 have been included. The sizes M 1.7, M 2.3 and M 2.6 have been barred for new designs. b) ...