DIN 917

Hexagon cap nuts

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M 4 to M 72 coarse and fine pitch thread hexagon cap nuts assigned to product grade A.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM A325M
1993
English

HIGH-STRENGTH BOLTS FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers requirements of various types of quenched and tempered steel bolts in nominal thread diameters M16 to M36 inclusive, commonly known as "high-strength structural bo [...]
DIN
DIN 7340
1993
English

Tubular rivets made from tube

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal tubular rivets made from seamless tube.
DIN
DIN 6927
1983
English

Prevailing torque type all-metal nuts with flange

This standard gives specifications for prevailing torque type all-metal nuts with flange, with metric threads with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, [...]
JIS
JIS B 0254
1985
English

Screw thread limit gauges for parallel pipe threads

This Japanese Industrial Standard specifies the limit gauges, hereinafter referred to as the "limit gauges for screw threads", to be used for dimensional inspection of parallel pipe threads (G) [...]
DIN EN
DIN EN 10346
2009
English

Continuously hot-dip coated steel flat products – Technical delivery conditions – English version of DIN EN 10346:2009-07

This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction, of steels with high proof strength [...]
IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ens [...]
IFI
IFI-301
2008
English

GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES

All UN, UNJ, M, and MJ thread form gages shall be calibrated using the commonly accepted metrology techniques described in this standard using properly maintained standard metrology equipment. [...]
DIN
DIN 915
1980
English

Hexagon socket set screws with dog point – ISO 4028 modified

ISO 4028 specifies product grade A hexagon socket set screws with dog points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
DIN
DIN 261
1987
English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649 [...]