ISO 7379
Hexagon socket head shoulder screws
English
1983
0.000
Detailed Information
This International Standard lays down the specification for hexagon socket head shoulder screws with metric dimensions and nominal shoulder diameters from 6,5 to 25 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
Large size washers
This standard specifies requirements for product grades A and C washers with a large outside diameter, i.e. washers with an outside diameter approximately equal to three times the nominal thread diameter of bolts with which the washers are intended to be used. The preferred application of […]
1997
English
STAINLESS STEEL METRIC NUTS
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric nuts with nominal thread diameters M1.6 th rough M36, and intended for use in engineering applications requiring general corrosion resistance. 1.2 Eight groups of stainless steel alloys are c […]
1981
English
Parallel pins
Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If such a connection is meant to be disconnected repeatedly, then it becomes preferable to use tap […]
1995
English
Cross recessed countersunk flat head screws (common head style) – Grade A – Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals
This part of ISO 7046 specifies the characteristics of recessed countersunk flat. head screws with threads M2 up to and including M10, of grade A and of property class 8.8 for steel, A2-70 for stainless steel and CU2 and CU3 for non-ferrous metals.
1956
English
Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application
No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these must be agreed with the manufacturer when ordering.