DIN 1804
Slotted Round Nut for Hook Spanner – ISO Metric Fine Thread
English
1971
0.000
Detailed Information
Material (strength properties): at least 5 according to DIN 267 Sheet 4
Type: w unhardened and unground
h hardened to HRC 60 ± 2 with the exception of the thread, faces ground
For hook wrenches, see DIN 1810
Download File
(Log in to download spec.)
Check out other specifications
2000
English
ISO metric thread rolling screws Part 1: Types, designation and requirements
This standard specifies dimensions, the designation and requirements for design and dimensional accuracy of ISO metric thread rolling screws. For further dimensions, tolerances, materials, mechanical and performance requirements, testing and acceptance inspection of thread rolling screws, referen...
2000
English
Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B
This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) and B (M18 to M52).
2010
English
THUMB SCREWS AND WING SCREWS (INCH SERIES)
This Standard covers the general and dimensional data for the various types of thumb screws and wing screws recognized as standard.
2001
English
Fasteners—Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
This Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, screws and studs; — thread rolling screws; — self-tapping screws; — self-drilling screws; — nuts; — washers whic...
1998
English
CLEARANCE HOLES FOR METRIC THREADED FASTENERS
1.1 This Recommended Practice presents clearance holes for metric threaded fasteners. 1.2 This Recommended Practice is in essential agreement with ISO 273. The differences are that the ISO standard does not include clearance holes for tapping screws and the recommended hole tolerances are slightl...
1998
English
Technical drawings — Screw threads and threaded parts — Part 1 : General conventions
This part of JIS B 0002 specifies methods for representing screw threads and threaded parts on technical drawings.