Check out other specifications
1997
English
Hexagon socket set screws
Introduction This Japanese Industrial Standard has been prepared based on ISO 4026, ISO 4027, ISO 4028 and ISO 4029 published in 1993 as the 2nd edition, without alteration in the technical contents with respect to the corresponding parts (quality, shape and dimensions). However, items which are ...
2005
English
Hexagon nuts with flange
This Standard specifies the characteristics of hexagon nuts with flange. If, in special cases, specifications other than those listed in this Standard are required, they should be selected from existing standards, for example JIS B 0205-2, JIS B 0209-2, JIS B 1052 and JIS B 1054-2. NOTES 1 Hex...
1998
English
Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fasteners and specifies coating thicknesses as well as hydrogen embrittlement relief for high-strength and s...
2004
English
Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 t...
1995
English
METRIC HEAVY HEX STRUCTURAL BOLTS
1.1 This standard covers the complete general and dimensional data for metric heavy hex structural bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options describe...
2004
English
SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A
THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.