DIN 7968

Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts

English 1999
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nuts and washers to be used.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 3213
1998
English

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

(a) SCREW: CORROSION-RESISTING STEEL (CRES) IN ACCORDANCE WITH MIL-S-82496. (b) 0-RING: FLUOROSILICONE RUBBER, COMPOSITION B IN ACCORDANCE WITH MIL-S-82496 (RESISTANT TO MIL-H-5606 HYDRAULIC FL [...]
DIN
DIN 7971
1970
English

Pan Head Tapping Screws with Slot

Bracketed nominal diameters should be avoided wherever possible. Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes [...]
Custom
John Deere | JDM F25
2022
English

Specification for Zinc Flake Coatings for Bolted Joints

1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosion r [...]
DIN EN
DIN EN 22340
1992
English

Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340

This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
DIN
DIN 267-1
1982
English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no special s [...]
DIN
DIN 50150
1976
English

Testing of Steel and Cast Steel – Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength

The conversion table In this Standard applies - to hardness values determined according to the following standards: ~DIN 50 103 Part 1 and Part 2 (Rockwell) ~DIN 50 133 Part 1 (Vickers) and ~DI [...]
ASTM
Abstract of ASTM F788/F788M
2002
English

SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs. including heat [...]
ASTM
Abstract of ASTM F879
2002
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0. [...]
ASME
ASME B18.5.2.1M
1996
English

METRIC ROUND HEAD SHORT SQUARE NECK BOLTS

This standard covers the general and dimensional data for metric series round head short square neck bolts recognized as American National Standard and intended primarily for applications in th [...]