DIN 8187
European type roller chains
English
1984
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for European type roller chains which, together with their associated chain wheels, are predominantly used as power transmission elements between two or more shafts.
Download File
(Log in to download spec.)
Check out other specifications
1992
English
Half-length taper grooved pins (ISO 8745 : 1986) English version of DIN EN 28 745
This International Standard specifies the characteristics of half-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to each sid...
1998
English
ROUND HEAD BOLTS (INCH SERIES)
This standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Standard. Also included is an appendix covering gages and gaging for checking bolt straightness.
1994
English
Eyenuts
This Japanese Industrial Standard specifies eyenuts for general lifting work of machinery (hereafter referred to as "nuts").
1990
English
Screw and washer assemblies – Coarse threaded screws with captive conical spring washer
This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a captive conical spring washer. Wave spring washers are intended to counteract loosening of bolted conne...
2004
English
Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 t...