ISO 7045
Pan head screws with type H or type Z cross recess — Product grade A
English
1994
0.000
Detailed Information
This International Standard specifies the characteristics of pan head screws of product grade A, with threads from
M1,6 to M 10 inclusive, and with type H or type Z cross recess.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
Screw and washer assemblies – Coarse threaded screws with captive curved spring lock washer
This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M12 screw with flat bearing face, assigned to a property class below 8.8, and a captive curved spring lock washer (and also an optional plain washer). Curved spring lock washers are intended to counterac...
1995
English
Studs – with a length of engagement equal to about 1 d
This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo (‘without interference-fit thread’) or Sn4.
1992
English
Unhardened parallel pins with internal thread (ISO 8733 : 1986) English version of DIN EN 28 733
This International Standard specifies the characteristics of unhardened parallel pins with internal thread, with metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
2001
English
Phosphate conversion coatings of metals – Method of specifying requirements – English version of DIN EN 12476
This European Standard specifies a method of specifying requirements for phosphate conversion coatings, intended primarily for application to ferrous metals, aluminium, zinc, cadmium and their alloys (see annex A).
1990
English
Screw and washer assemblies – Coarse threaded screws with captive conical spring washer
This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a captive conical spring washer. Wave spring washers are intended to counteract loosening of bolted conne...
1993
English
METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS
1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as American National Standard. Also included are appendices covering formulas for dimensions, part numbering ...