Check out other specifications
2000
English
Mechanical properties of fasteners made of carbon steel and alloy steel— Part 1 : Bolts, screws and studs
This Standard specifies the mechanical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Products conforming to the requirements of this Standard are evaluated only in the ambient temperature range and may no...
1983
English
Prevailing torque type hexagon nuts with flange and with non-metallic insert
This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert, with metric thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this standar...
1985
English
Diameter of clearance holes and counter bores for bolts and screws
This Japanese Industrial Standard specifies the diameters of clearance holes, hereinafter referred to as the "bolt hole diameters", and the diameters of counterbores for bolts, machine screws, and the like for general use.
1998
English
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044: 1997, modified) English version of DIN EN 1664
This European Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with flange and threads from M5 up to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M 16 and with property classes 8, 10 and 12.
2011
English
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
This part of ISO 7046 specifies the characteristics of countersunk flat head screws with threads from M1,6 to M10 inclusive, of product grade A and property class 4.8, and with type H or type Z cross recess. If, in special cases, specifications other than those listed in this part of ISO 7046 ar...