JIS B 1012

Cross recesses for screws

English 1986
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, hereinafter referred to as the “cross recess”.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 28737
1992
English

Unhardened taper pins with external thread (ISO 8737 : 1986) English version of DIN EN 28 737

This International Standard specifies the characteristics of unhardened taper pins with external thread, and metric dimensions and nominal diameters, d1, from 5 to 50 mm inclusive.
ASTM
ASTM F606
2010
English

TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS

1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension ind [...]
DIN EN
DIN EN 27435
1992
English

Slotted set screws with long dog point (ISO 7435: 1983) English version of DIN EN 27 435

This International Standard specifies the characteristics of slotted set screws with long dog point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
ISO
ISO 6506-1
2014
English

Metallic materials — Brinell hardness test — Part 1: Test method

This part of ISO 6506 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines. For some specif [...]
DIN
DIN 2999-2
1973
English

Whitworth Pipe Threads for Tubes and Fittings – Cylindrical Internal Thread and Conical External Thread – Gauging System and Use of Gauges

The gauging system takes account of the function of the screwed joints and of practical installation requirements. The cylindrical internal thread is therefore gauged with a conical screw limit [...]
SAE
SAE AS8879
2001
English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root of t [...]
ANSI ASME
ANSI/ASME B18.10
2000
English

TRACK BOLTS

All types of track bolts and nuts used by the various railroads and electric railways in the United States and Canada were studied by the committee, and it is their belief that the recommended [...]
DIN
DIN 6325
1971
German

Zylinderstifte, gehärtet – Toleranzfeld m6

Zylinderstifte nach dieser Norm werden hauptsächlich als Poßstifte für Werkzeuge, Spannzeuge und Meßzeuge verwendet.
ISO
ISO 7089
1983
English

Plain washers – Normal series – Product grade A

This International Standard lays down the specification for plain washers of product grade A, preferable for hexagon bolts, screws and nuts of product grades A and B with normal width across fl [...]