JIS B 1013

Countersunk head screws— Head configuration and gauging

English 1994
0.000
JIS
Detailed Information

This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the respective product standards.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1445
1977
English

Clevis pins with head and stud end

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
ASTM
ASTM F594
2009
English

STAINLESS STEEL NUTS

This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications re [...]
DIN EN
DIN EN 24034
1992
English

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.
ISO
ISO 7721
1983
English

Countersunk head screws – Head configuration and gauging

This International Standard specifies the Characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid do [...]
DIN
DIN 74361-2
1982
English

Disc wheels for motor vehicles and trailers – Fasteners for stud centring

This standard specifies requirements for fasteners for stud-centred disc wheels on motor vehicles and trailers. Any necessary draft on the hexagon shall be within the tolerance on the width acr [...]
DIN
DIN 267-5
1986
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Annahmeprüfung – ISO 3269 Ausgabe 1984 modifiziert

1.1 Diese Norm enthält ein Verfahren, welches der Besteller (Verbraucher) bei seiner Eingangsprüfung anwenden kann, um zu entscheiden, ob ein Los von Verbindungselementen, sofern bai Bestellung [...]
ASME
ABSTRACT OF ASME B1.1
2008
English

UNIFIED INCH SCREW THREADS (UN AND UNR THREAD FORM)

This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modu [...]
DIN
DIN 609
1995
English

Hexagon fit bolts

This standard specifies dimensions and technical delivery conditions for M8 to M52 hexagon fit bolts, assigned to product grade A (for size M10 or less) or product grade B (for size M12 or grea [...]
DIN
DIN 6913
1966
English

Spring Washers with Safety Ring

The surface of the spring washer and of the safety ring must be smooth and free from scale and burr. The spring washers must be coiled with constant pitch and without any kinks (with the excep [...]