ISO 7415
Plain washers for high-strength structural bolting, hardened and tempered
English
1984
0.000
Detailed Information
This International Standard specifies those hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters from M12 to M36 inclusive.
Download File
(Log in to download spec.)
Check out other specifications
2000
English
STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED
This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/4 inch to 1-1/2 inches for submarine safet...
1994
English
Curved spring lock washers
Spring lock washers as covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of a property class less than 8.8, as specified in DIN EN 20898-1. They are intended to counteract the effect of setting which results In bolt/nut assembli...
2001
English
Mechanical properties of non-ferrous metal fasteners
This Japanese Industrial Standard specifies the mechanical properties of bolts (including studs), machine screws and nuts made of non-ferrous metals such as copper, copper alloys and aluminium alloys and conforming to the requirements for application given in Table 1 and the test and inspection m...
1995
English
Studs – with a length of engagement equal to about 2,5 d
This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo (‘without interference-fit th...
1992
English
Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740
This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from 1,5 to ...