JIS B 1014

Countersunk flat head screws— Part 2 : Penetration depth of cross recesses

English 1994
0.000
JIS
Detailed Information

This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7415
1984
English

Plain washers for high-strength structural bolting, hardened and tempered

This International Standard specifies those hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters from M12 [...]
JIS
JIS B 1112
1995
English

Cross-recessed head wood screws

This Japanese Industrial Standard specifies the cross-recessed head wood screws (Hereafter, referred to as "wood screws".) made of steel wire, stainless steel and brass for general use.
DIN
DIN 984
1981
English

Spring retaining rings with lugs for use in bores (internal circlips)

For the purpose of this standard, internal circlips are spring retaining rings for fitting in bores (grooves). They have an eccentric form and have a number of lugs of equal depth uniformly dis [...]
BS EN
BS EN 10027-1
2016
English

Designation systems for steels Part 1: Steel names

This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, [...]
DIN
DIN 6883
1956
English

Taper Key Torque Transmission – Parallel Keys – Dimensions and Application

No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
NASM
NASM 16562
1998
English

PIN, SPRING-TUBULAR, SLOTTED

MATERIAL: STEEL, CARBON, GRADE 1070 THRU 1095 (UNS G10700 THRU G10950) IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION-RESISTANT, TYPES 410(UNS S41000) AND 420(UNS S42000) IN ACC [...]
BS EN
BS EN 14399-1
2015
English

High-strength structural bolting assemblies for preloading Part 1: General requirements

This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading. The intended use of bolting [...]
DIN
DIN 921
1986
English

Slotted pan head screws with large head

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
DIN
DIN 6923
1983
English

Hexagon nuts with flange

This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to [...]