JIS B 1056

Prevailing torque type steel hexagon nuts— Mechanical and performance properties

English 2000
0.000
JIS
Detailed Information

This Standard specifies the mechanical and performance properties for prevailing torque type steel hexagon nuts (including those with flange) when tested over an ambient temperature range of 10 °C to 35 °C. Properties will vary at higher and lower temperature.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0176-2
2002
English

Threading tools — Vocabulary Part 2 : Thread cutting dies

This part of JIS B 0176 specifies terms and definitions related to thread cutting dies to be used mainly for metal workings in general.
DIN
DIN 1479
1975
English

Turnbuckle Nuts Made from Hexagon Bar

Material: Steel of at least 350 N/mm2 (≈34 kp/mm2) tensile strength Steel of higher strengths or specified materials by agreement
DIN
DIN 186
1988
English

T-head bolts with square neck

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are sp […]
DIN
DIN 471
1981
English

Circlips (retaining rings) for shafts – Normal type and heavy type

Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spri […]
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number […]
DIN EN
DIN EN 10263-2
2002
English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion wit […]
DIN EN
DIN EN 10083-2
2006
English

Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels – English version of DIN EN 10083-2:2006-10

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: — semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 1 […]
ASME
ABSTRACT OF ASME B1.2
2007
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for th […]
DIN EN
DIN EN 28743
1992
English

Half-length centre grooved pins (ISO 8743 : 1986) English version of DIN EN 28 743

This International Standard specifies the characteristics of half-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with […]