IFI-551
METRIC STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS
English
1999
0.000
Detailed Information
This standard establishes the dimensional, mechanical and performance requirements of metric structural flush break pull
mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly.
Download File
(Log in to download spec.)
Check out other specifications
2006
English
LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER
This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufactured heads after driving, driven heads, and hold-on (dolly bar) and rivet set impressions. Also […]
1986
English
Slotted countersunk (flat) head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g hes been replaced by product grade C. c) The content of the […]
1998
English
THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS
This standard covers the complete general and dimensional data for the various types of slotted and recessed head tapping screws and metallic drive screws recognized as "American National Standard." Also included are appendixes which provide specifications and instructions for protrusion […]
1983
English
Hexagon thin castle nuts (previous design)
This standard gives specifications for hexagon thin castle nuts with metric threads ranging from 6 to 52 mm nominal thread diameter, assigned to product grades A (up to and including 16 mm nominal thread diameter) and B (above 18 mm nominal thread diameter).
2015
English
Specification for Non-Electrolytically Applied Zinc Flake Coatings
1.1 JDM F13 specifies requirements for nine grades of corrosion resistant non-electrolytically applied zinc flake coatings on ferrous parts, with three levels of corrosion resistance, and three levels of lubricity. 1.2 JDM F13 coatings are specified in terms of ISO 10683. 1.3 JDM F13 coat […]
2010
English
NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recognized as American National Standard. Also included are appendices covering gaging of slots in slotted […]