JIS B 1163

Square nuts

English 2001
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the steel square nuts for general use (hereafter referred to as “nuts”). However, the square nuts to be used for wood working are excluded.

The strength classes 4T to 6T of the mechanical properties specified in this Standard are to be disused in the future, and the mechanical properties in the Annex 1 or the Annex 2 to JIS B 1052 are to be introduced.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1008
1988
English

Split pin holes and wire holes for bolts, screws and studs

This Japanese Industrial Standard specifies dimensions and positions of split pin holes to be provided at threaded portion of hexagon head bolts, studs, etc., and of wire holes to be provided at heads of hexagon head bolts. Further, in cases where concerning split pin hole and wire hole, […]
ASTM
Abstract of ASTM F467
2001
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this s […]
DIN
DIN 7992
1970
English

T-head Bolts with Large Head

Technical conditions of delivery according to DIN 267
ASME ANSI
ASME/ANSI B18.3.6M
1993
English

METRIC SOCKET SET SCREWS

1.1.1 This standard contains complete general and dimensional requirements for metric series socket set screws of nominal sizes from 1.6 mm to 24 mm recognized as American National Standard. Also included are appendices covering formulas for dimensions, part numbering system and preferred […]
DIN EN
DIN EN 28733
1992
English

Unhardened parallel pins with internal thread (ISO 8733 : 1986) English version of DIN EN 28 733

This International Standard specifies the characteristics of unhardened parallel pins with internal thread, with metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
DIN
DIN 7349
1974
English

Plain Washers – for Bolts with Heavy Clamping Sleeves

For heavy clamping sleeves, see DIN 1481.