JIS B 1012
Cross recesses for screws
English
1986
0.000
Detailed Information
This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, hereinafter referred to as the “cross recess”.

Download File
(Log in to download spec.)
Check out other specifications
1992
English
SCREW THREAD GAGING SYSTEMS FOR DIMENSIONAL ACCEPTABILITY OF METRIC SCREW THREADS
(a) This standard presents screw thread gaging systems suitable for determining the acceptability of UN, UNR. UNJ, M. and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used. (b) A screw thread gagin...
2000
English
Plain washers – Large series – Part 1: Product grade A
This part of ISO 7093 specifies the characteristics of large-series, product - grade- A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers conforming to this part of ISO 7093 are intended for use...
1994
English
Countersunk slotted raised head screws (common head style) Product grade A
This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected fr...
1987
English
Prevailing torque type hexagon nuts with nonmetallic insert
This standard specifies requirements for M 5 to M 24 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for sizes over M 16. If, in special cases, nuts are to comply with specifications other than those given in this s...
1973
English
Unified coarse screw threads
This Japanese Industrial Standard specifies the basic profile, and the formal and basic size of unified coarse screw threads used for aircrafts and otherwise only when especially required. Reference : This unified coarse screw threads are coincident with the coarse series screw threads of ISO in...
1993
English
INSPECTION AND QUALITY ASSURANCE FOR SPECIAL PURPOSE FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. The basic structure of this plan outlines the quality a...