Check out other specifications
1994
English
MACHINE DOWEL PINS – HARDENED GROUND [METRIC SERIES]
1.1 Scope 1.1.1 This standard covers the dimensional and general data for hardened ground dowel pins in sizes 1.5 - 25 mm in two series recognized as American National Standard, which are widely used in general industrial applications. 1.1.2 The inclusion of dimensional data in this standard is...
1997
English
Hexagon bolts with flange — Heavy series
This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
1995
English
QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURERS, DISTRIBUTORS, AND TESTING LABORATORIES
1-1.1 Part 1 contains the definitions used in this standard. Parts 2, 3, and 4 contain the requirements necessary to receive accreditation from The American Society of Mechanical Engineers (ASME) which must be met by manufacturers and alteration distributors of fasteners, non-alteration distribut...
1992
English
Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B (ISO 8674 :1988) English version of DIN EN 28 674
This International Standard gives specifications for hexagon nuts, style 2, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 36 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.
2000
English
Hexagon weld nuts
This standard specifies requirements for sizes M3 to M16 coarse and fine pitch thread hexagon weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1. Hexagon weld nuts with flange are specified in DIN 977.