DIN EN ISO 887

Plain washers for metric bolts, screws and nuts for general purposes

English 2000

0.000

Detailed Information

This international Standard specifies the full range of the nominal dimensions of product grade A and C plain washers for general purpose bolts, screws and nuts of nominal thread diameters ranging from 1 mm to 150 mm inclusive.

This International Standard is not applicable to washers for screw and washer assemblies in relation to hole diameters and thicknesses.

Information on the use of plain washers is given in annex A.

Download File

(Log in to download spec.)

Check out other specifications

DIN EN

DIN EN 26157-3

1991

English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to special requirements (ISO 6157 -3 : 1988) (English version of DIN EN 26 157 Part 3)

This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts. screws and studs with - nominal thread diameters 5 mm and larger; - product grades A and B; - nominal lengths l < 10d (or longer if spec...

DIN

DIN 6918

1990

English

Square taper washers for high-strength structural bolting of steel channel sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.

NASM

NASM 51959

1999

English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82°, CROSS-RECESSED, CORROSION-RESISTANT STEEL, UNC-2A

MATERIAL: AUSTENITIC CORROSION-RESISTANT STEEL SCREWS SHALL BE MANUFACTURED FROM TYPE 302 (UNS S30200), TYPE 304 (UNS S30400). TYPE 304L (UNS S30403). TYPE 305 (UNS S30500), TYPE 316 (UNS 531600), TYPE 316L (UNS 531603). TYPE 384 (UNS S38400), OR TYPE XM-7 (UNS S30430) IN ACCORDANCE WITH CHEMICAL...

JIS

JIS B 1187

1995

English

Hexagon head screws with captive washer

This Japanese Industrial Standard specifies steel and brass hexagon head screws with captive washer for general purposes. The hexagon head screw with captive washer is a hexagon head screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent the di...

JIS

JIS B 0176-1

2002

English

Threading tools—Vocabulary Part 1 : Taps

This part of JIS B 0176 specifies terms and definitions related to the taps to be used mainly for metal workings in general.

ASME

ASME Draft B18.2.4.1M

1999

English

METRIC HEX NUTS, STYLE 1

This standard covers the complete general and dimensional data for metric hex nuts, Style 1, recognized as American National Standard.