Abstract of ASTM F594
STAINLESS STEEL NUTS
English
2002
0.000
Detailed Information
1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.
Download File
(Log in to download spec.)
Check out other specifications
1993
English
Mounting dimensions of rolling bearings
This standard gives design details of shoulders of shafts and housings, in or on which rolling bearings are to be seated. Compliance with the values specified precludes distortion of the bearing as a result of inadequate fillet radii, leaves enough space for any projecting cage parts of tapered r...
2010
English
ELECTRODEPOSITED COATINGS ON THREADED FASTENERS (UNIFIED INCH SCREW THREADS (UN/UNR))
This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with unified inch screw threads. It specifies coating thickness, supplementary hexavalent chromate or non-hexavalent passivate finishes, corrosion resistance, precau...
1981
English
Circlips (retaining rings) for shafts – Normal type and heavy type
Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spring retention in grooves and are suitable for the transmission of axial forces.
1991
English
Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) Product grade B (ISO 4015: 1979) English version of DIN EN 24 015
This International Standard gives specifications for hexagon head bolts with metric dimensions and thread diameters from 3 up to and including 20 mm, with reduced shank (shank diameter ≈ pitch diameter), of product grade B.
1998
English
SCREW AND WASHER ASSEMBLIES – SEMS [METRIC SERIES]
This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS, which are recognized as American National Standards. (The word SEMS is a generic term applicable to screw and washer assemblies.)
1993
English
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints Using AS...