1998
English
INSPECTION AND QUALITY ASSURANCE PLAN REQUIRING IN-PROCESS INSPECTION AND CONTROLS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. The basic structure of this plan outlines the q […]
1998
English
DIMENSIONAL REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS
This standard covers the complete general and dimensional data for metric prevailing torque hex nuts, Table 1, and hex flange nuts, Table 2.
1995
English
FORGED EYE BOLTS
This standard is limited to dimensions and capacities for forged threaded eyebolts intended primarily for lifting applications, and covers the following types and styles. Type 1, Plain pattern (straight shank) (see Table 1) Style A, Long length Style B, Short length Type 2, Shoulder pat […]
1998
English
SCREW AND WASHER ASSEMBLIES – SEMS [METRIC SERIES]
This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS, which are recognized as American National Standards. (The word SEMS is a generic term applicable to screw and washer assemblies.)
1996
English
SCREW AND WASHER ASSEMBLIES – SEMS
(a) This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. The word SEMS is recognized in the United States as a generic term applicable to screw and washer assemblies. Also included in this standa […]
2001
English
GLOSSARY OF TERMS FOR MECHANICAL FASTENERS
This standard is a summary of nomenclature and terminology currently used to define and/or describe mechanical fasteners, related characteristics, and the manufacturing processes that produce these products. Utilization of these terms by manufacturers and consumers is intended to reduce o […]
1996
English
PLOW BOLTS (INCH SERIES)
1.2.1 This standard recommends Table 1, No. 3 square neck, 80 deg round countersunk head and Table 2, No. 7 reverse key, 60 deg round countersunk head plow bolts for new designs. It includes No. 3 square neck, round countersunk repair head; Table 3, No. 4 countersunk, square repair head; […]
1994
English
HEADED CLEVIS PINS [METRIC SERIES]
This standard covers the complete dimensional and general data for two types, A and B, of metric series headed clevis pins intended for general applications and recognized as American National Standard. Type A headed clevis pins are without holes. Type B headed clevis pins specified her […]
1994
English
HEADLESS CLEVIS PINS [METRIC SERIES]
1.1.1 This standard covers the complete dimensional and general data for two types, A and B, of metric series headless clevis pins intended for general applications and recognized as American National Standard. Type A headless clevis pins are without holes. Type B headless clevis pins s […]
1995
English
COTTER PINS [METRIC SERIES]
1.1.1 This standard covers the complete dimensional and general data for cotter (spilt) pins recognized as American National Standard. 1.1.2 The inclusion of dimensional data in this standard is not intended to imply that all products described are stock production items. Consumers shoul […]
1994
English
MACHINE DOWEL PINS – HARDENED GROUND [METRIC SERIES]
1.1 Scope 1.1.1 This standard covers the dimensional and general data for hardened ground dowel pins in sizes 1.5 - 25 mm in two series recognized as American National Standard, which are widely used in general industrial applications. 1.1.2 The inclusion of dimensional data in this sta […]
1994
English
SPRING PINS – SLOTTED [METRIC SERIES]
1.1.1 This standard is intended to cover the complete dimensions and mechanical and performance requirements for metric series slotted spring pins recognized as American National Standard, which are widely used in general industrial applications. Slotted spring pins have straight cylindri […]
1995
English
SPRING PINS – COILED TYPE [METRIC SERIES]
Coiled spring pins shall have straight cylindrical sides with both ends chamfered. They are available in standard duty, heavy duty, and light duty to suit various design requirements. Coiled type spring pins have multiple walls, are spirally wrapped from strip stock to a diameter larger t […]
2002
English
WING NUTS
This standard is intended to cover complete general and dimensional data for the various types of wing nuts, thumb screws, and wing screws recognized as American National Standard.
1998
English
METRIC MACHINE SCREWS
This standard covers the complete general and dimensional data for metric flat countersunk, oval countersunk and pan slotted and recessed head machine screws and metric hex and hex flange head machine screws recognized as standard. Also included are Appendices which provide specifications […]
2002
English
INSPECTION AND QUALITY ASSURANCE FOR SPECIAL PURPOSE FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, record keeping and disposition of nonconforming materials and parts […]
2002
English
INSPECTION AND QUALITY ASSURANCE FOR HIGH-VOLUME MACHINE ASSEMBLY FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners such as th […]
2002
English
INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans and record keeping. Included in this plan are fasteners for general purpose applications, such as those where h […]
1993
English
TAPPING SCREW APPROXIMATE HOLE SIZES
The approximate hole sizes set forth on the following pages are intended to provide general guidance to the user in selecting holes for installing the respective types of thread forming and thread cutting tapping screws in various commonly used materials. It should be noted, however, that […]
1998
English
METRIC THREAD FORMING AND THREAD CUTTING TAPPING SCREWS
This standard covers the complete general, dimensional and performance requirements for the various types of slotted and recessed head metric tapping screws recognized as standard. Also included are Appendices which provide specifications and instructions for protrusion gaging of flat cou […]