Check out other specifications
1974
English
Clip Bolts
Clip bolts according to DIN 6378 are clamping components which are used in the manufacture of workpieces. They form part of fixtures which are in immediate contact with workpieces for machining and which must be firmly connected to them. To tighten the fixture the clamping clips of several clip...
2008
English
NONFERROUS NUTS FOR GENERAL USE
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specific...
1991
English
COATINGS OF CADMIUM MECHANICALLY DEPOSITED ON IRON AND STEEL
1.1 General - This specification covers the requirements for a coating of cadmium mechanically deposited on metal products. The coating is provided in various thicknesses up to and including 12 µm. 1.2 Mechanical deposition greatly reduces the risk of hydrogen embrittlement and is suitable for co...
1992
English
Mechanical properties of fasteners – Nuts with specified proof load values – Fine pitch thread (ISO 898-6 : 1988) English version of DIN EN 20 898 Part 6
This part of ISO 898 specifies the mechanical properties of nuts with specified proof load values: - with nominal thread diameters, d, from 8 mm up to and including 39 mm; - of triangular ISO thread and with diameters and pitches according to ISO 68 and ISO 262 (fine pitch thread); - with thread ...
2012
English
Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.