DIN 1445
Clevis pins with head and stud end
English
1977
0.000
Detailed Information
The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
Download File
(Log in to download spec.)
Check out other specifications
1995
English
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
1.1 This specification covers steel rivets for use in boilers and pressure vessels and steel bars for use in the manufacture of rivets. 1.2 Two grades are covered: 1.2.1 Grade A-Bars having a yield point of 23 000 psi (160 MPa) minimum with no controls on carbon content. 1.2.2 Grade B-Bars havin...
2006
English
LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER
This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufactured heads after driving, driven heads, and hold-on (dolly bar) and rivet set impressions. Also included...
2005
English
TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES
This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requirements in nominal sizes #10 thru 1 in. intended for application temperatures of - 49°F to 250°F. Both pa...
1994
English
Countersunk flat head screws— Part 2 : Penetration depth of cross recesses
This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).