Check out other specifications
1993
English
PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic requirements for three grades of corrosion protective coatings for fasteners. Grade I consists of a zinc phosphate coating with a supplemental protective oil type compound and Grades II and III consist of a zinc phosphate with a supplemental zinc rich epoxy...
2004
English
SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A
THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
2011
English
Button head screws — Part 2: Hexagon socket button head screws with collar
This International Standard specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this In...
1993
English
CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or dip·drain methods. 1.3 The coating process does not induce hydrogen embrittlement, providing that the fasten...
2006
German
Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07; Deutsche Fassung EN 10269:1999/A1:2006/AC:2006
Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.